MIPI MASS Verification IP
The MIPI automotive SerDes framework end to end: CSI-2 and DSI-2 over A-PHY with security and functional-safety service extensions.
MIPI MASS verification IP
MIPI Automotive SerDes Solutions (MASS) defines how CSI-2 and DSI are carried end to end over A-PHY in vehicles, with functional safety and security.
Lumina VIP for MIPI MASS covers Automotive SerDes Solutions, as published by MIPI Alliance. It comes as verification IP, built for Lumina, so the same components run in simulation and report their results in one place.
What the MIPI MASS VIP covers.
Features
- CSI-2 and DSI protocol adaptation layers
- Camera and display service extensions for safety
Checks and error injection
- End-to-end protection of camera and display streams
- Security extensions for authenticated streams
- Corrupted and missing frames reported to the receiver
Scenarios and options
- Point-to-point and daisy-chained links
What it checks
- Packet structure, ECC and CRC
- PHY states, lane control and timing
- Virtual channels, data types and commands
- Low-power entry and exit
Verification IP capabilities
- Active and passive agents for every protocol role, set per instance
- Bus widths, timing and optional features set by parameters, and changeable while a test runs
- A sequence library from basic directed traffic to constrained-random stress
- Error injection, static or on the fly, with checks that the expected error was seen
- Protocol checks that run in real time, each tied to a rule of the specification
- Scoreboards that check data end to end
- Throughput, latency and utilisation statistics for each interface
- Callbacks at each stage for your own checks and stimulus
- UVM register model adapters for protocols that carry register access
- Transaction logs and messages linked to the waveform for debug
Why Lumina VIP.
- Fast MIPI MASS testbench bring-up: connect the agents, pick a test and run
- Every failure names the rule it broke and the transaction that broke it
- Protocol coverage merges with your design coverage in one database
- Readable SystemVerilog and UVM source your team can extend
- Runs natively in Lumina Sim, with no wrappers and no separate compile
- Results structured for engineers and AI agents alike
Verification components.
Each component works on its own or together with the others in one environment, in active or passive mode.
- 01Transmitter
- 02Receiver
- 03Passive monitor
MIPI MASS products.
MIPI MASS verification IP
UVM agents that drive and check a protocol in simulation, in every role the protocol defines.
Includes
- Active and passive UVM agents for each protocol role
- Configurable sequences, from directed to constrained-random
- Protocol checks that flag violations with a spec reference
- Functional coverage of the protocol's features
- Scoreboards and transaction logs readable by people and AI agents
Test suite and coverage.
- Directed tests for each feature of the specification
- Constrained-random tests across configurations and traffic mixes
- Error-injection tests that check how the design recovers
- A functional coverage model mapped to the specification
- Regression lists ready to run in Lumina
Test focus for this protocol family
- Every lane count and data rate in scope
- Low-power and high-speed transitions
- Each packet and data type
- Header, CRC and protocol errors
What you receive.
- Readable source of every component
- The test suite and its coverage model
- An example environment connected to a sample design
- User guide, integration guide and release notes
- Scripts to run the examples in Lumina
Where it is used.
- Phones and wearables
- Automotive cameras and displays
- IoT and imaging devices
Frequently asked questions.
What is Lumina VIP for MIPI MASS?
Lumina VIP for MIPI MASS is a set of verification products for designs that use MIPI MASS: verification IP. The MIPI automotive SerDes framework end to end: CSI-2 and DSI-2 over A-PHY with security and functional-safety service extensions.
Which MIPI MASS versions does it support?
Automotive SerDes Solutions, as published by MIPI Alliance. If you need another version or option, tell us which one.
Which verification components are included?
Transmitter, Receiver and Passive monitor. Each one can be used on its own or together with the others in one environment.
What language and methodology does it use?
The verification IP and models are written in SystemVerilog with UVM, as readable source your team can extend.
How does it work with Lumina?
It runs in Lumina Sim beside your RTL. Protocol coverage merges into the same database as your own coverage, and every violation names the rule it broke and the transaction that broke it.
Which tests come with it?
Directed tests for each feature of the specification. Constrained-random tests across configurations and traffic mixes. Error-injection tests that check how the design recovers. A functional coverage model mapped to the specification. Regression lists ready to run in Lumina. For this protocol family the tests focus on: every lane count and data rate in scope, low-power and high-speed transitions, each packet and data type and header, CRC and protocol errors.
What is delivered?
Readable source of every component. The test suite and its coverage model. An example environment connected to a sample design. User guide, integration guide and release notes. Scripts to run the examples in Lumina.
How can I get Lumina VIP for MIPI MASS?
Lumina VIP for MIPI MASS is in preview. Email hello@lumeeslab.com with the versions and product types you need.
Need VIP for a protocol?
Tell us which protocols and versions you need. We also add protocols on request.
Lumina VIP
hello@lumeeslab.comHelpful to include
- The protocols and versions
- Product types: VIP, assertion IP, memory model, transactor
- Your schedule